Greg 's VTOL settings

Just waiting for my V22 fuselage to arrive. Will install with my twinrex cyclic control V22 mechinism.

I alway want to build another VTOL with simpler tricopter like mixing. Here is Greg's VTOL setting


Futaba 9C Transmitter Mixes

--------------------------------------------------------------------------------
Mix 1 - Throttle -> Flap (Ch. 3 to Ch. 6 for controlling both main motors)
Mix 2 - Aileron -> Flap (Ch. 1 to Ch. 6 for manual roll control of one motor in up position)
Mix 3 - Elevator -> Gear (Ch. 2 to Ch. 5 for manual pitch control of wing swing in up position)
Mix 4 - Rudder -> Aileron (Ch. 4 to Ch. 1 for rudder stick control of aileron yaw in up position)
Mix 5 - Offset -> Aux2 (Fixed offset to Ch. 8 for turning on/off pitch control motor in up position)
Mix 6 - Throttle -> Aux2 (Fixed curve +100% offset into Ch. 8 for disabling pitch motor when throttle stick is < 10% or all the way down)
Mix 7 - Unused

Receiver Channel Assignments

--------------------------------------------------------------------------------
Channel 1 - Ailerons
Channel 2 - Elevator
Channel 3 - Throttle for main motor 1
Channel 4 - Rudder
Channel 5 - Hover/Flight Mode Switch
Channel 6 - Throttle for main motor 2
Channel 7 - JR G500A Gain adjustment for wing swing servo
Channel 8 - Throttle for 150w pitch control motor